Level 2 Electrician Hurstville

Splitting one supply into two, three or six? Across Hurstville and the wider St George area, a lot of Level 2 work starts when a block becomes a duplex, a row of townhouses or a shop with flats upstairs. Each dwelling needs its own meter, the consumer mains have to carry the combined load, and the connection has to be completed on the Ausgrid network before anyone moves in. ERIS is a Level 2 Accredited Service Provider that handles this network-side work: meter installation, main power distribution (MPD) boards, consumer mains, supply upgrades, and disconnection and reconnection. Tell us what’s being built and where, and we’ll tell you which parts need a Level 2 electrician.

When a Hurstville Property Needs Level 2 Work

A Level 2 electrician is needed whenever work touches the supply between the Ausgrid network and your main switchboard. Around Hurstville, that usually looks like:

• A new duplex, townhouse or dual occupancy that needs a meter for each dwelling
• A shop-top or mixed-use building where tenancies need their own metering
• An older home being converted into two dwellings on one supply
• Consumer mains that are too small for the new load after a rebuild
• A meter that has to move during renovations or a facade change
• A temporary disconnection so builders can work safely, then reconnection

Metering and MPD Boards for Multi-Dwelling Builds in St George

When one lot becomes several dwellings, the metering has to be planned before the walls go up. Each dwelling usually gets its own meter, so each owner or tenant can open their own electricity account. On townhouse and small unit projects, those meters often sit together on a main power distribution board, known as an MPD, in a position the network and meter readers can reach.

Getting this wrong is expensive. A board in the wrong spot, a cabinet with no room for the last meter, or consumer mains sized for one house instead of three can hold up the connection and push back handover.

Here’s what the Level 2 side of a multi-dwelling build involves:

• Confirming the supply arrangement and total load for every dwelling
• Installing the MPD and a metering position for each unit
• Running or upgrading consumer mains from the connection point to the board
• Completing the connection, notifications and compliance paperwork

Our approach to MPD installation for multi-dwelling projects.

Level 2 Services for Hurstville Homes, Shops and Developments

Meter installation and replacement

New meters, extra meters for a second dwelling, solar and off-peak hot water meters, and replacement of meters that no longer suit the installation. Our meter installation service covers homes, shops and mixed-use buildings.

Consumer mains and supply upgrades

Consumer mains are the cables that run from the network connection point to your main switchboard. When the load goes up, they may need replacing. Some sites also move to three-phase power to spread a larger load more evenly.

Disconnection, reconnection and builders supply

For demolitions, rebuilds and switchboard replacements, the supply has to be safely isolated at the network side and reconnected when the job is ready. While the build is underway, a temporary builders supply keeps the trades powered.

Overhead and underground service work

Many St George streets still have overhead supply. A new build may keep an overhead service to a point of attachment or move to an underground connection, depending on the site and Ausgrid’s requirements.

What Happens When You Contact ERIS

• Call or send us the address, the type of build and the number of dwellings.
• Share plans, the electrical layout or photos of the existing meter board if you have them.
• We work out which parts are Level 2 work and which belong to your general electrician.
• We confirm the scope and quote it in writing.
• The work is carried out to Ausgrid’s requirements and the NSW Service and Installation Rules.
• We complete the notifications and paperwork so the connection and meters can be finalised with your retailer.

Who Can Do Network-Side Work in Hurstville?

A general licensed electrician can wire a home up to the main switchboard. The service line, connection point, meters and consumer mains are network-side work, and in NSW that work is limited to Accredited Service Providers with the right authorisation. ERIS holds Level 2 ASP Licence 3022 and Electrical Contractor Licence 204698C, so one team can handle the network connection and the electrical work around it.